From the treatment plant to the discharge point, real-time water quality data, automated KLHK submissions, and a water balance that stays honest. Operators see what's leaving the site before the regulator does.
Most Indonesian factories still rely on monthly or quarterly grab samples to prove wastewater compliance. A single sample at 10 AM on a Tuesday says nothing about what happened at 3 AM during a process upset, or during the weekend when nobody was watching.
SPARING (Sistem Informasi Pemantauan Air Limbah Industri secara Kontinu) is KLHK's continuous wastewater monitoring framework. Every industrial discharge point above the permitted threshold must stream water quality data. COD, BOD, TSS, pH, temperature, flow, on a sub-hourly cadence.
MUSA's wastewater monitoring program covers the full chain: submersible or flow-through sensors at each outfall, edge logging with the MUSA Integrator, automated SPARING submission, and a live water balance in MUSA View. Your WWTP operator, your HSE manager, and the regulator all see the same data.
The same telemetry feeds your water assessment, your sustainability report, and your carbon ledger. One measurement, many uses.
Chemical Oxygen Demand, the primary compliance parameter for most industrial permits.
Biochemical Oxygen Demand 5-day test, tracked continuously via correlation models.
Total Suspended Solids, turbidity-based continuous measurement with periodic lab correlation.
Continuous pH monitoring, critical for both compliance and treatment process control.
Discharge temperature, required parameter and key indicator of process upsets.
Volumetric flow rate, converts concentration to mass load for the regulator.
Dissolved Oxygen, treatment process indicator; low DO means biological treatment is struggling.
Total Dissolved Solids, early warning for salt intrusion or process contamination.
Direct feed to KLHK. No manual uploads, no missed windows, no spreadsheet errors.
Operators see COD, pH and TSS trends as they happen, optimise dosing, aeration and sludge age on the fly.
Get warned before a parameter breaches its limit, not after the regulator's monthly review.
Inflow, process, treatment and discharge, all reconciled in one view. Find leaks and losses you didn't know existed.
Fouling, drift and calibration status tracked automatically. No more invalid data from a dirty probe.
A kawasan operator can supervise every tenant outfall from a single MUSA View tenant.
Multi-parameter water quality sondes for every outfall configuration, open channel, closed pipe, or submersible in a stilling well. UV-Vis COD, optical turbidity, pH, conductivity, temperature, DO, and flow.
Edge logger pushes certified water quality data to KLHK on the regulator's cadence. Every submission logged, every receipt archived, every retry automatic.
Every outfall rendered as a card: concentration vs limit, 24-hour trend, last calibration, last submission, and mass-load calculation. Drill into any reading for the raw sensor frame and the treatment state at that moment.
Build a water balance across intake, process, treatment and discharge. See where water is lost, where it's recycled, and where treatment is underperforming. Change an input and watch downstream KPIs recompute in real time.
Outfall inventory, flow regime, existing treatment, regulatory baseline. Site walk and feasibility note.
Sensor selection, mounting design, sample conditioning. Procurement and FAT.
Mechanical, electrical, comms. Correlation against lab samples, SPARING registration. Go-live sign-off.
Live data, automated submissions, scheduled maintenance, KPI reviews. Quarterly sensor calibration included.
High COD, TSS loads
Dye, heavy metals
BOD, oil & grease
Hydrocarbons, phenols
Kawasan · multi-tenant
POME, high BOD
